Velodyne Acoustics VRP-1000 - Manual (Page 3)

continued. . .
2
☞
☞
Congratulations!
Congratulations on your purchase of a Velodyne Rear Port (VRP)
subwoofer system. This system represents the state-of-the-art in
home audio reproduction and will provide you with years of listening
pleasure when properly cared for. Read and follow this instruction
manual to insure safe and proper system connection and operation.
Caution!
Please observe the following instructions to insure safe and proper sys-
tem operation.
Note: Do not leave unit in direct sunlight or use in high humidity
environments!!!
Warning!
To prevent fire or shock hazard, do not expose this equipment to
rain or moisture. To avoid electrical shock, do not open speaker
enclosure or amp chassis cover. Please observe all warnings on
the equipment itself. There are no user serviceable parts inside.
Please refer all service questions to your authorized Velodyne dealer.
Prior to Installation:
Please unpack the system carefully. This unit is heavy. Use caution
when lifting or moving to avoid injury. Remove all staples used to
seal the carton as they can scratch the cabinet. Please save the
carton and all packaging materials for future use. Packing this unit
in any other carton may result in severe damage when shipping.
Record the serial number in the space provided on page 13 for future
reference.
Product Features
•
A single driver consisting of either:
- 10" (8.2" piston diameter) subwoofer with 2.0" high-temp voice
coil and 40 ounce motor structure or,
- 12" (9.8" piston diameter) subwoofer with 2.0" high-temp voice
coil and 40 ounce motor structure
• Adjustable (50 to 200 Hz) low-pass crossover with a 12 dB/octave
slope
• Line-level (RCA) inputs
• Speaker-level inputs and outputs with spring loaded terminals
Félicitations !