VBrick Systems Portal Server ETV v4.1 - Manual (Page 53)

Global Settings
ETV Portal Server Admin Guide 43
Figure 8. Connecting Control Devices
Table 10. Device Connectors
Configuring Control Devices
You also need to configure the baud rate and passthrough state of the VBrick associated with
a control device. In IWS, go to the Configuration: Passthrough page and set these values as
follows:
Table 11. Baud Rate and Passthrough State
Device Connector
VCR DB-9 †
DVD DB-15 †
MPEG-1 Encoder DB-9
MPEG-2/4/WM Encoders RJ-45
† Typical device connector.
Device Baud Rate Passthrough State
DVD 4800 Responder
VCR 9600 Responder
VBIR 2400 N/A