Basic operation recordable ringer – VTech i 5866 User Manual

Page 25

Advertising
background image

25

Basic Operation

Recordable Ringer

Record a Ringer

You can easily record a unique ringer to be used as either your Default Ringer or for a
Distinctive Ringer assigned to a specific phonebook directory. You can record with either
the provided Audio Patch Cord (not the USB cord), or with the Handset microphone. You
may record up to 9 unique ringers for a maximum of 10 seconds each.
Cued-up music typically produces the best sounding recorded ringer. It is recommended
to begin recording your ringer at the beginning of a song, rather than a portion from the
middle to produce an audibly pleasing custom ringer.

To record a ringer, follow these steps:

Select the

Sounds & Alerts

icon

in the Main Menu.

Select the

Sound Clips

icon

.

If you are using the Audio Patch Cord, insert the 3.5mm plug (the larger end) into the
headset jack of your PC or audio source. Insert the 2.5mm plug (the smaller end) into
the Headset jack on the side of the

i 5866

Handset.

You can listen to the playing music through your Handset speaker after connecting the
Audio Patch Cord and selecting the

Record Preview

menu option. Adjust the recording

volume at the audio source. To begin recording, press

RECORD

. If you want to use the

Handset microphone to record ringers, select the

Record Clip

menu option. After the

beep, and with the Handset microphone facing the audio source, start recording.

NOTE:

If the memory is full, the Handset will prompt

Clip memory full!

Hit the

STOP

softkey stop the recording.

After recording, you may

PLAY

or

SAVE

the melody. If you choose

SAVE

, you will be

prompted to Enter Clip Name. Enter a name (up to 8 characters) for the recording. If
you make a mistake, press the

softkey to backspace. Press

SAVE

to confirm.

Clip has been saved

will display. The melody will be stored in the

My Clips

section.

You can listen to all of your recorded musical ringers in

My Clips

. If you want, when

in My Clips, you can press

DELETE

then

YES

to erase one of them.

NOTE:

When you want to use the Handset microphone to record ringers, do not

insert the Audio Patch Cord into the headset jack.

Note:

Your

i 5866

Handset is preset with many musical ringer options (i.e. Jazz,

R&B, Reggae, Rock, etc) for you to use as your default ringer or a distinctive ringer.
Three of them are protected, you can’t replace them. You can replace the other 6
preset ringers with your own. You can also record your own ringers in another 3
blank locations in My Clips.

Advertising