Vector VEC37R - Manual (Page 3)

3
1. FEATURES
• Recharges from 12 volt DC accessory outlet using DC adapter
• Corded function allows for 12 volt corded use while charging
• Small, swivel “eyeball” area light provides up to 15 hours of operation
• Powerful, prefocused, replaceable quartz halogen bulb in spotlight
• Rubber safety guard (bezel) protects spotlight
• Recharges from North American Standard 110/120 volt AC, 60 Hz, AC outlet
• Three-way power switch - spotlight, off and area light
• Comfortable 2 position adjustable handle
• Adjustable, folding stand provides stability on tabletops and other flat surfaces
. OPERATION
A three-position switch (spotlight, off, area light) controls on/off operation of both lights. The
spotlight can be continuously lit for up to 25 minutes on a full battery charge. The area light can
be lit for up to 15 hours on a full battery charge. The unit may be operated during DC recharge
only. Figure 1 shows locations of the handle, adjustable stand. Figure 2 rear view, shows spot-
light/off/area light switch, area light and handle lock button.
The handle adjusts to two different positions. The handle is released from either locked position
by pressing on the handle lock button (located near two handle screws) and rotating the handle
to the new position. When the handle is close to the body of the light (folded) the Rescue Spot is
carried with the weight of the unit below the handle. When the handle is rotated perpendicular
to the body of the unit, the unit is carried pistol-style with the unit’s weight on top. It is your choice
of operating positions, depending on your needs and comfort.
FIGURE 3 FIGURE 4
3. CHARGING
Charging or operating with 2 volt DC Adapter - Plug the DC fused recharge/power
adapter (included) into the barrel receptacle on the back of the spotlight body, and then insert
the 12 volt DC plug into the 12 volt DC outlet of your vehicle or other 12 volt DC power source.
Make sure the locking trigger switch is in the off position. Allow approximately 3 hours charging
time, if the engine is running. You may use the spotlight while its internal battery is recharging.
Spotlight can operate directly with a DC power cord - Operation from external 12
volt DC source, with at least 10 amp capacity, will allow for area light or spotlight operation and
internal battery to charge simultaneously.
AREA LIGHT
AREA LIGHT/
SPOTLIGHT SWITCH
RUBBER BEZEL
HANDLE LOCK
BUTTON
WORK STAND
HOUSING SCREWS
FOLDED HANDLE
FIGURE  FIGURE 2
AREA LIGHT
HANDLE LOCK
BUTTON
2 POSITION
ADJUSTABLE HANDLE
RECHARGE
PORT AND PLUG