Venturer PDV28420C - Manual (Page 12)

E-11
CONNECTIONS
CONNECTING A HIGH-DEFINITION (HD) SOURCE USING COMPONENT CONNECTION
High-Definition (HD) Devices with component video output must be connected to the YUV input.
Connect the component video cable and audio cable (not included) as shown.
Make sure you connect the component video cable and audio cable from the other equipment (COMPONENT
VIDEO OUT and AUDIO OUT) to this unit (COMPONENT VIDEO IN and AUDIO IN - YUV IN).
To COMPONENT
VIDEO OUT jacks
To COMPONENT
VIDEO IN jacks
(YUV IN)
To AUDIO
IN jacks
(YUV IN)
* May require a subscription for receiving
HD channels. Check with your cable/
satellite service provider for details.
CONNECTING A HIGH-DEFINITION (HD) SOURCE USING HDMI CONNECTION
HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for
use with DVD players, DTV, set-top boxes and other digital AV devices. HDMI was developed to provide the
technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in
one specification. HDCP is used to protect digital content transmitted and received by DVI-compliant or HDMI-
compliant displays.
HDMI has the capability to support standard, enhanced or high-definition video plus standard to multi-channel
surround-sound audio. HDMI features include uncompressed digital video, a bandwidth of up to 2.2 gigabytes
per second (with HDTV signals), one connector (instead of several cables and connectors), and communication
between the AV source and AV devices such as DTVs.
HDMI, the HDMI logo and High-
Definition Multimedia Interface are trademarks
or registered trademarks of HDMI licensing LLC.
Connect the HDMI cable (not included) as
shown:
Make sure you connect the cable from the
source equipment (HDMI OUT) to this unit
(HDMI IN).
Press the HD button to match the video source
output quality.
To HDMI
OUT jack
To HDMI
IN jack