VistaQuest VQ3015 - Manual (Page 21)

- 16 -
Shutter button to confirm the setting. Press the Menu button and Shutter button
to exit the menu.
• Using Slide Show
Use the Slide Show feature to sequentially display your pictures and videos on the camera
LCD, on a television screen, or on any external display device equipped with a video input.
1. Make sure the
Function switch is set to , and then press the Menu button.
2. Press the or to select [Slide Show] on the screen and then press the Shutter
button.
3. Each picture and video thumbnails is displayed in the order in which you took them.
5. Press the
Shutter button again to stop the slide show.
Note: 1. If you want to run the slide show on a television, connect the video cable from the
video-out port on the camera to the video-in port on the television. Ensure that the
Video Out setting is correctly set to NTSC or PAL.
2. Once the user selects the Slide Show Mode, camera will automatically play all the
pictures. When playing finished, the function will stop automatically and the screen
will stay at the last picture.
3. Video is played like the way of playing option.
• Magnifying Pictures
Use the Magnify feature to zoom in to different areas of the picture.
1.Make sure the
Function switch is set to .
2.Use or to select the picture you want to enlarge, and then press the button to zoom
in the picture; press the button to zoom out the picture.