VIEWSONIC WR100 User Manual
Page 57
ViewSonic Wireless Router
53
2
My Wireless Access Point Router will not turn on. No
LED’s light up.
•
The power is not connected.
•
Connect the power adapter to your AP and plug it into the
power outlet.
IMPORTANT! Only use the power adapter that came with your
AP. Using any other adapter may damage your AP Router.
3
LAN Connection Problems I can’t access my router.
•
Make sure your router is powered on.
•
There is no network connection.
•
The computer you are using does not have a compatible
IP Address. Be sure that the IP Address used on your
computer is set to the same subnet as the router. For
example, if the router is set to 192.168.1.1, change the IP
address of your computer to 192.168.1.15 or another
unique IP Address that corresponds to the 192.168.1.X
subnet.
•
Press the Reset button located on the rear of the router to
revert to the default settings.