Venturer HPS9308 - Manual (Page 96)

- 96 -
Track Log:
In Venturer GPS Navigation you have the possibility to record your journeys
using the position data your GPS provides in every second or every few
seconds (depending on your GPS settings). When you start the recording,
position data is saved in the database until you stop recording it. This set of
sequential GPS positions is called track log. Each set of consecutive positions
has a name (originally it is the time of recording but you can change it to any
name you like) and a color in which it can be displayed on the map. Later you
can replay the journey on the screen of the Venturer GPS Navigation device
as if it were happening again. This is good for demonstration purposes or for
analyzing your maneuvers during the trip.
Track-up:
A kind of map orientation when the map is rotated to always look in the direction
you are headed. See also North-up and Map Orientation.
Via Point:
Routes in Venturer GPS Navigation can have several (as many as you want)
different destinations to reach in a specific order. All these points except the
final destination are called via points, as the route goes ‘via’ (through) them.
The destinations can be seen in the Route Information screen on the Route
line, and each via point is announced by the voice instructions as you approach
and when you reach it. Should your via point serve as a stopover, navigation
continues automatically as you depart. Navigation will resume even if you turn
off and on your device or restart Venturer GPS Navigation.
Zoom In and Out:
The Zoom function is used to change the scale of the map. Use Zoom In to
scale down the map to see less of it but in more detail, and use Zoom Out to
scale the map up to have a broader view of that part of the map with fewer
details.