Vizio E370VT - Manual (Page 29)

6
21
E320VT / E370VT / E420VT
To adjust the screen aspect ratio:
1. Press the OK button on the remote. The on-screen menu is displayed.
2. Use the Arrow buttons on the remote to highlight the Wide icon and press
OK. The Wide menu is displayed.
3. Use the Left/Right Arrow buttons on the remote to highlight the screen
mode you want to display, then press OK:
• Normal - Preserves an original 4:3 aspect ratio. Since 4:3 content is
not large enough to fill the TV’s screen, black bars are added to the left
and right of the display image.
• Wide - Stretches 4:3 content to the edges of the screen. Since the
picture is being stretched, the display image may appear distorted.
If the program is already formatted for widescreen viewing (1.85:1
or 2.35:1), then black bars will appear on the top and bottom of the
display image.
• Zoom - Expands images with black bars to fit the screen.
•
Panoramic expands the display image to fill the screen. Images may
appear wider than intended. If you are watching widescreen (1.85:1
or 2.35:1) content, black bars will still appear on the top and bottom
of the display image.
This option is only available when the TV is
displaying a 480i/480p source.
• Stretch expands the display image to fill the screen. Images may
appear wider than intended. If you are watching widescreen (1.85:1
or 2.35:1) content, black bars will still appear on the top and bottom
of the display image.
This option is only available when the TV is
displaying a 720p/1080i/1080p source.
Adjusting the Audio Settings
Using the Audio Settings menu, you can adjust the following:
• Enable or disable SRS TruSurround HD ™
• Enable or disable SRS TruVolume ™
• Adjust the equalizer settings
• Adjust bass and treble levels
• Adjust speaker balance
• Enable or disable the built-in speakers
• Select the digital audio output mode
• Change the audio language
• Reset the audio settings
Enabling or Disabling SRS TruSurround HD
TruSurround HD is a robust multichannel virtualization technology developed
by SRS Labs that provides an enhanced listening experience unlike any other
technology offered for a two speaker playback environment.
To enable or disable SRS TruSurround HD:
1. Press the OK button on the remote.
The on-screen menu is displayed.
2. Use the Arrow buttons to highlight
Audio and press OK.
3. Use the Arrow buttons to highlight
SRS TruSurround HD.
4. Press the Right/Left Arrow buttons to
select On or Off and press EXIT.