Velodyne Acoustics CHT-10R - Manual (Page 11)

Usage
8
.
w w w . v e l o d y n e . c o m
CHT-R User’s Manual
This section addresses day-to-day usage of your CHT-R subwoofer.
R e m o t e C o n t r o l
Figure 3 shows the remote control, enabling you to easily choose whatever listening mode
you desire.
Figure 3. Remote Display
POWER - This button forces your CHT-R unit into standby mode. The woofer will not play and
the LED will turn off. The unit will remain in this mode until the POWER button is pressed again.
To fully deactivate (i.e. power down) the unit, turn off the power switch on the back panel.
MUTE - This button mutes the subwoofer. The light on the subwoofer will blink slowly if the unit
is muted. To unmute the subwoofer, press the MUTE button again.
PHASE - These buttons allow you to optimize the subwoofer performance for the location and
your listening position. Select the switch position at which you hear the most bass. The light will
blink according to the following schedule:
0 degrees 1 blink
90 degrees 2 blinks
180 degrees 3 blinks
270 degrees 4 blinks