Vivitar ViviCam T027 User Manual
Page 27
26
This option will delete all of the content at one time. If you would like to delete individual images,
use the delete menu in the camera‟s Playback mode.
1)
Press the SET button to open the menus for the current mode.
2)
Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.
3)
Press the UP or DOWN direction control buttons to highlight the menu options. While
scrolling down the selected option will be highlighted.
4)
If you would like to proceed with the format, select “Yes” and press the SET button.
5)
You will be asked to confirm your wish to format your memory card.
6)
Select “No” to exit without formatting.
7)
Select “Yes” and press the SET button to begin the format.
8)
The memory card will be completely formatted.
9)
A message will appear confirming that your memory card has been formatted clean.
Firmware Menu
Use this menu to view the Firmware version on your camera or to reset your camera settings to
the factory default settings.
1)
Press the SET button to open the menus for the current mode.
2)
Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.
3)
The
“Default Setting” is selected.
4)
Press the SET button to reset the camera to the factory default settings.
5)
You will be asked to confirm your wish to restore all of the factory settings.
6)
Press the UP or DOWN
buttons to select “Yes” and press the SET button to begin the
format.
7)
The camera will be reset.
8)
A message will appear indicating that the settings have been reset successfully.