Valor Auto Companion Inc. Valor Legend Ultra 837 AN - Manual (Page 7)

Safety Upgrade Instructions
Page 7
Figure 12. Fascia locating
6. Adjusting the height of the ignition bar
When refitting the Fascia it is important that the height of the ignition bar is
adjusted to ensure smooth operation.
The height of the ignition bar can be adjusted to suit the slot in the fire front. The
adjustment must be made before the window is refitted as follows:
1. Locate slots in the fascia over the claws at the sides of the main appliance (figure.
12).
2. Angle the fascia up and turn the ignition bar to test if it will project through the slot
in the fascia.