VTech CS6409 - Manual (Page 5)

2
Getting started
Battery installation
Install the battery as shown below.
Plug the battery connector securely into the socket inside the
handset battery compartment.
Place the battery with the label
THIS SIDE UP facing up and the
wires inside the battery compartment.
Align the cover flat against the battery compartment, then slide it
towards the center of the handset until it clicks into place.
Charge the handset by placing it in the telephone base or
charger. The CHARGE light is on when the handset is charging.
1.
2.
3.
4.
1
CHARGE light
remains on when
charging.
2
3 4
If the handset will not be used for a long time, disconnect
and remove the battery to prevent possible leakage.
To purchase a replacement battery, visit our website at
www.vtechphones.com or call 1 (800) 595-9511. In Canada,
go to www.vtechcanada.com or dial 1 (800) 267-7377.
•
•