Viper 1000 Model - Manual (Page 23)

24 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
disarming diagnostics
Extra disarm chirps are the Tamper Alert. If four chirps are heard
when disarming, the system was triggered in your absence. If five
chirps are heard, a zone was triggered so many times that Nuisance
Prevention ® Circuitry has bypassed that zone. The status LED will
indicate which zone was involved. (See Table of Zones section of
this guide.) The system will retain this information in its memory,
and continue to chirp four or five times each time it is disarmed,
until the next time the ignition key is turned on.
system status chirps
The siren will chirp when arming/disarming the system. The
pattern of chirps will audibly report the system’s status as
described below.
Action Number of Chirps Description
Arm 1 System armed
Arm 1 (3-second delay), 1 System armed with
Bypass Notification
Disarm 2 System disarmed
Disarm 4 System disarmed with
Tamper Alert
Disarm 5 System disarmed NPC ®
active
➜
➜