Vertex Standard FT-2800M - Manual (Page 57)

55 FT-2800M O
PERATING
M
ANUAL
“S
ET
” (M
ENU
) M
ODE
30 S SRCH
Function: Selects the Smart Search Sweep mode.
Available Values: SINGLE/CONT
Default: SINGLE
SINGLE: In this mode, the transceiver will sweep the current band once in each direction
starting on the current frequency. All channels where activity is present will be
loaded into the Smart Search memories; whether or not all 31 memories are filled,
the search will stop after one sweep in each direction.
CONT: In this mode, the transceiver will make one pass in each direction as with One-
Shot searching; if all 31 channels are not filled after the first sweep, however, the
radio will continue sweeping until they are all filled.
31 TOT
Function: Sets the Time-Out Timer.
Available Values: 1 MIN - 60 MIN, or OFF
Default: 6 MIN
32 W ALT
Function: Enables/disables the Weather Alert feature.
Available Values: ON/OFF
Default: OFF
33 W/N DV
Function: Reducing the MIC gain.
Available Values: WIDE/NARROW
Default: WIDE
M
ENU
S
ELECTION
D
ETAILS