Noi tar ep o e cn av d a, Headset operation – VTech i 5808 User Manual
Page 11
10
noi
tar
ep
O e
cn
av
d
A
Headset Operation
Your
i 5808 handset is equipped with a 2.5mm headset jack for use with an optional
accessory headset for handsfree operation. If you choose to use the headset option,
you must obtain an optional accessory headset, which is compatible with the
i 5808.
For best results, use a VTech 2.5mm headset.
To purchase a headset, visit us on the web at www.vtechcanada.com or call VTech
Customer Service at 1-800-267-7377
.
Once you have a compatible 2.5mm headset, locate the headset jack on the
i 5808
NOTE:
Whenever a compatible headset is connected
to the cordless handset, the microphone on
the handset will be muted. This is done to
limit the effect of background noise.
Many compatible headsets have a reversible,
monaural design. This means you can wear
your headset on either ear, leaving one ear
free for other conversations.
Belt Clip
The
i 5808 is also equipped with a
detachable belt clip. Align the pins on the
inside edge of the clip with the notches
on the sides of the Handset. The belt clip
should snap securely into place. Do not
force the connection.