Vizio GV47L FHDTV20A - Manual (Page 23)

VIZIO GV47L FHDTV20A User Manual
Version 4/23/2008 23
www.VIZIO.com
2.3.2 Using Your Antenna or Cable for TV
1. Turn off the power to the LCD HDTV.
2. Connect the coaxial (RF) connector
from your antenna or cable to the
DTV/TV CABLE/ANTENNA
connector at the rear of the LCD
HDTV
3. Turn on the power to the LCD HDTV.
4. Select TV using the INPUT button on the remote or touch sensor on front right hand side of
the LCD HDTV, or directly by pressing the TV button on the Remote Control.
2.3.3 Using the Antenna or Cable through your VCR
1. Turn off the power to the LCD
HDTV and VCR.
2. Connect the “Output to TV”, “RF
Out” or “Antenna Out” connector
on the rear of your VCR to the
DTV/TV CABLE/ANTENNA
connector at the rear of the LCD
HDTV.
3. Turn on the power to the LCD HDTV and VCR.
4. Select TV using the INPUT button on the remote or touch sensor on front right hand side of
the LCD HDTV, or directly by pressing the TV button on the Remote Control.
Note: If you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the rear of
your VCR.