Vizio VOJ320M User Manual

Voj320m, Setup, Help topics

Advertising

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

SETUP

(Cont.)

VOJ320M

HELP TOPICS

1. The Initial Setup menu should appear on-screen

(see Fig. 1)

. Follow the menu

instruction using your remote control to initialize the process.

2. Select your desired language

(see Fig. 2)

3. Choose Home Mode for optimal energy savings.

IF YOU'RE CONNECTING USING A CABLE OR
SATELLITE BOX:

1. Exit the Setup Wizard.

2. Set your input source to match the device you’re connecting to.

3. You’re done! Enjoy the show.

IF YOU'RE CONNECTING USING A CABLE FROM
THE WALL OR ANTENNA:

1. Choose between Antenna or Cable to match your input source

(see Fig. 3)

2. Begin the scan for channels

(see Fig. 4)

Note: Your Service Provider may provide access to HD channels during the channel scan. Please be
patient and wait for 100% completion.

3. Once the scan is complete, follow the on-screen instruction to exit the
Initial Setup menu

(see Fig. 5)

EXTENDED

WARRANTIES

LEARN MORE

and special offers.

Protect your VIZIO product with up to 5 years of added

repair service! Extended coverage begins when the

manufacturer's warranty expires so you’ll receive

maximum protection!

Visit us online at:

or Call:

For more info on Extended Warranties

Refer to your User Manual for in-depth descriptions or

more information.

(888) 849. 4623

www.VIZIO.com

No Power

Picture is blurry or fuzzy/

image quality issues

Cannot change channels up and

down with direct cable hookup

from wall or antenna

Cannot return to the Setup Wizard

Screen is displaying blue/no

signal and/or turning off after a

few seconds

Panoramic mode is not available

Black or gray bars on top, bottom,

and/or sides of picture

PROBLEM

SOLUTION

Make sure the power button is ON (the VIZIO logo glows white). Make sure the AC power cord is securely connected to the AC
socket and try plugging the TV directly into the wall. Plug another electrical device (like a radio) to the outlet to verify the outlet is
supplying power.

For the best image quality, view HD wide screen programs where possible. If HD content is not available, view Standard Definition
from a digital source. Standard analog TV will always be noticeably inferior to HD because your digital flat panel TV has video that
is many times better than old TVs, and thus you can see interference and deficiencies you did not know you had.

Press the MENU button. Use the arrows to navigate to the TV TUNER MENU. Highlight the first option, called Tuner Mode. Select the
appropriate input by using the left and right arrows. Once Tuner Mode is correct, highlight "AutoSearch", then press the right
arrow.

The Setup Wizard is no longer accessible after being run once, but all of the same settings can still be changed. Press the MENU
button to access them. For channel scan, see the above topic.

Your TV may be on an inactive input. After powering on the TV, press the INPUT button on your remote repeatedly until a picture
re-appears. If this does not work, try it a second time but press the button slower this time; it can take as long as 30 seconds for
the image to reappear.

When the TV displays an HD resolution the Panoramic viewing mode will not be available.

Try setting your TV to wide or zoom mode; the image should fill the screen. If you still see bars, they are part of the image the TV is
receiving. Cable and satellite boxes may add black bars to the picture, especially when HDMI cables are used. For more
information, please contact your service provider.

PROGRAM YOUR CABLE OR SATELLITE REMOTE

Call your Cable or Satellite provider to determine if you need a 3, 4 or 5-digit code. Refer to the following chart of VIZIO codes and follow your provider's instructions to program
your Cable or Satellite remote.

SERVICE PROVIDER

CABLE

11758, 10178, 10128

1758, 0178, 0128

DIRECT TV

DISH NETWORK

627

11758, 10178, 10128

1758, 0178, 0128

5-DIGIT CODES

4-DIGIT CODES

3-DIGIT CODES