Pick device type, Pick device brand, Confirm remote connection – Vizio SV422XVT User Manual
Page 43: Equalizer settings, Reset audio mode
VIZIO SV422XVT HDTV User Manual
Analog Audio Out
This option sets the volume control properties when using the RCA (white and red)
connectors as audio line out to connect a home theater system. Choose from Fixed or
Variable. When set to Variable, volume from the external speakers will change when
you change the volume setting on the TV. When set to Fixed, the volume can only be
changed by the settings on the external stereo system.
Audio Control
Select which device the VIZIO remote control adjusts. Choose from TV or External.
When set to TV, the VIZIO remote will control the audio of the TV speakers. When set to
External, the VIZIO remote will control the audio of your selected device.
Device Setup
This feature allows you to add audio devices to your HDTV and control them with your
VIZIO remote control. This feature was also available during the initial Setup App. The
feature is not available in TV mode.
Pick Device Type
Select the type of device that is connected to your HDTV. Choose from VCR,
DVD Player, Blu-Ray Player, Sat Receiver, Cable Box, DVR, or None.
Pick Device Brand
Select the brand name of the device that is connected to your HDTV. The brand
names will vary based on the device type selected above.
Confirm Remote Connection
Automatically program the VIZIO remote control to allow it to control your device.
1. Turn the device On.
2. Point the VIZIO remote directly at the device.
3. Press
OK to select Confirm Remote Connection. The TV will attempt to
communicate with the device.
4. Point the VIZIO remote at the device and the press the Input power
button. The device should turn off. If it does, select It worked and press
OK. If it does not power off, select Try the Next Code. Repeat until you
find a code that works.
Equalizer Settings
To select the options in the Equalizer sub-menu, press OK. A new menu will be displayed
showing the volume levels of different frequencies (pitches).
Note:
The Equalizer Settings menu will only be available when SRS TruSurround HD is set to Off.
Audio Mode
Choose from Jazz, Classical, Pop, Rock, or Flat.
EQ Mode
Choose from Basic or Advanced. When set to Basic, the equalizer options are Bass
and Treble. When set to Advanced, more options for fine tuning become available.
Starting from lowest to the highest frequencies, these options are 120 Hz, 500 Hz, 1.5
kHz, 5 kHz and 10 kHz. Press ▲ or ▼ to adjust to adjust the selected frequency to your
preference. Values above 0 will boost the volume at that frequency and values below 0
will attenuate the volume.
Reset Audio Mode
Return all Audio settings to factory default. A screen will come up to confirm your selection or to
cancel it. Press ◄ or ► to make the selection, and then press OK to accept it.
Note:
Only settings under the Audio menu will be reset.
Version 12/10/2009
43
www.VIZIO.com