Vizio M221NV User Manual
Page 41
VIZIO M221NV User Manual
Version 7/22/2010
41
www.VIZIO.com
Equalizer Settings
1. To select the options in the
Equalizer Settings sub-menu,
press OK. A new menu will be
displayed showing the available
equalizer functions. Press ◄ or ►
to select Basic or Advanced.
EQ Mode (Basic)
Adjust Bass and Treble.
EQ Mode (Advanced)
Adjust boost or attenuation of
different frequencies.
Starting from lowest to the
highest, they are 100 Hz,
300Hz, 1 kHz, 3 kHz and 10
kHz.
2. Press
▼ then◄ or ► to select the
frequency to be adjusted. Press
OK.
3. Press
▲ or ▼ to adjust the selected frequency to your preference. Values above 0 will boost
the frequency and values below 0 will attenuate the frequency.
Note:
The Equalizer adjustment will only be available when SRS TSHD is set to Off.
Tuner
When you first turned on your HDTV you scanned for channels using the Setup App. If you did not do this
or if your setup has changed, you can do this from the Tuner menu.
Note:
The tuner option can only be selected when your HDTV is in TV input mode.
Tuner Mode
Select Cable or Antenna depending
upon which equipment you have
attached to the DTV / TV Input.
Auto Channel Search
Automatically search for TV channels
that are available in your area. Be
sure to first select the correct tuner
mode above. The TV will search for
analog and digital channels. When the
search is done, press EXIT to begin
watching your programs.