Volvo 740 GL - Manual (Page 119)

1985 Volvo 740 GL, GLE, Turbo
3 Model plate
Vehicle Identification Number (VIN). Codes for color and upholstery etc. This plate is located on panel
above right headlight.
4 Loads and tire pressures
5 Federal motor vehicle safety standards (FMVSS) specifications (USA) and Ministry of
Transport (CMVSS) Standards (Canada)
This label is located on rear facing side of the driver's door.
6 Service label
Label on left-rear door frame.
Information on certain components.
All specifications are subject to change without notice.
pg. 107 Oils
Engine Oil
Oil quality:
According to API SF.
Oils with designation SF/CC and SF/CD comply with these demands.
Synthetic or semi-synthetic oils may be used if their specifications comply with the above.
Volvo recommends the use of fuel economy improving oils. When using these oils, the Volvo
recommended oil change intervals must be followed.
Volvo does not recommend oil additives as they can adversely affect the engine.
Capacity: (incl. oil filter) 4.0 US qts. (3.85 liters): on Turbo models, add 0.7 US qts/b. (0.6 liters) if oil
cooler is drained.
Manual transmission Quality ATF type F or G Capacity
2.4 US qts. (2.3
liters)
Automatic
transmission
Quality ATF Dexron IID Capacity
7.9 US qts. (7.5
liters
file:///K|/ownersdocs/1985/1985_740_GL_GLE_Turbo/85740_08.htm (3 of 13)12/30/2006 7:46:13 AM