Venturer PVS6370 - Manual (Page 2)

LOCATING A DESIRED SECTION
Locating a Specific Title
If a DVD contains title numbers, you can locate
a specific title by directly selecting its title
number.
1. Press the GOTO button.
2. Press the corresponding number button(s)
for the title you want.
3. Press the ENTER button to confirm.
Playback starts from the selected section.
Notes:
• If the title numbers you entered is not
permited by the DVD, after you press the
ENTER button, it will restore to - - -. You
should re-enter correct numbers.
• Some discs may not respond to this process.
• This method of locating a title is available
only on a DVD that contains title numbers.
Locating a Specific Chapter
If you know the chapter number for the chapter
that you want to play, you can locate it by directly
selecting that number.
1. Press the GOTO button.
2. Press or button to display Chapter and
press the corresponding number button(s)
for the chapter you want.
3. Press the ENTER button to confirm.
Playback starts from the selected section.
Notes:
• If the chapter numbers you entered is not
DVD PROGRAMMABLE MEMORY
Playing TItles/Chapters in a Favourite Order
You can combine your favourite titles/chapters and play them
in the order you determine.
1. When a DVD is stopped, press the MEMORY button, the
following display appears.
2. Select the items in the order you want by pressing the
number buttons.
Each time you press the Cursor buttons ( ,
, , ),
the space is highlighted. Highlight where you want to enter,
then press the corresponding number buttons.
3. Press the Cursor buttons ( , , , ) to move the highlighted bar to Play Memory, then
press the ENTER button. The DVD player starts memory playback.
4. To resume normal playback from memory playback
a) Press the MEMORY button in stop mode.
b) Press the Cursor buttons (
, , , ) to move the highlighted bar to “Clear All”, then
press the ENTER button. All the input programs will be cleared.
c) Press the PLAY button to resume normal playback.
REPEAT PLAYBACK
Repeating a Chapter
1. While the DVD is playing, press the
REPEAT DISC button until the
“
Repeat Chapter ” indicator displays on the
screen. The current chapter is played
repeatedly.
Repeating a Title
2. While the DVD is playing, press the
REPEAT DISC button until the
“
Repeat Title ” indicator displays on the
screen. The current title is played repeatedly.
To Resume Normal Playback
3. While the DVD is playing, press the
REPEAT DISC button until the
“
Repeat Off ” indicator displays on the
screen.
You can play a single track or the whole disc
repeatedly.
Repeating a Single Track
1. While the CD disc is playing, press the
REPEAT DISC button until the “
Repeat single ” indicator displays on the
screen. The current track is played
repeatedly.
Repeating a Whole Disc
2. While the CD disc is playing, press the
REPEAT DISC button until the “ Repeat all
” indicator displays on the screen. The whole
disc is played repeatedly.
To Resume Normal Playback
3. Press the REPEAT DISC button until the “
Repeat off ” indicator displays on the
screen.
Repeating a Specific Section
You can play a specific section repeatedly.
1. While the disc is playing, press the REPEAT
A-B button at the beginning of the section
(“
Rep A- ” is displayed) you want to play
repeatedly.
2. Press the REPEAT A-B button again at the
end of the section (“ Rep A-B ” is
displayed).
3. The Unit will immediately begin replaying
your selection.
To Resume Normal Playback
4. While the disc is playing, press the REPEAT
A-B button until the “ RepA-B Off ”
indicator displays on the screen.
Note:
• Some discs may not permit A-B repeat
operation.
• You cannot set the A-B repeat function for a
segment that includes multiple camera angles.
• You can specify a segment only within the
current title or track.
• There may be a slight difference between point
A and the location where playback actually
resumes depending on the disc.
VIEWING JPG FILES
This unit can play JPG files recorded on a CD-R or CD-ROM disc (CD-RW is not recommendable).
Viewing JPG Files
1. Open the disc door.
2. Hold a JPG file disc by its edge and gently push it onto the
spindle with the label side facing up until you hear a “click”.
3. Close the disc door. A list of folders/files will appear on the
screen.
4. Press the or button to select your desired file, the selected
picture will appear at the lower right corner. Press the PLAY
button to start playback. Press the button to display a folder
list.
Notes:
• You can press the PAUSE button to interrupt playback. Press the
PLAY button to resume
playback.
• You can press the STOP button to quit playback.
• You can press the
PREV or NEXT button to change the picture.
• You can press the ANGLE button to rotate direction of the picture by 90 o .
• Some discs may not permit this operation.
PLAY MODES FOR CD OR JPEG DISC
Play Modes for CD or JPG Disc
When play CD / JPG discs, you can modify the Play Modes through the Toolkit which appears on
the right of below picture on the screen. Press the / button to navigate between the windows
and the / button to select files/tracks or play mode items.
Then press the ENTER button.
1. In Stop mode, press the Cursor buttons ( , , , ) to select
"Edit mode" then press the ENTER button.
2. Use the Cursor buttons ( , , , ) to select tracks/files shown
on the left hand side of the window. Press the ENTER button
to confirm the selected tracks/files. "
" will appear in front of
the selected tracks/files.
3. Select "Add to program", then press the ENTER button. " "
will disappear from the screen. It means that the tracks/files you have selected are added into
the "Program view".
4. Select "Program view" to view programmed files. To add more files by "Browser view" follow
above steps.
5. Press the PLAY button to start the program playback.
The Toolkit has the following play mode items:
• Repeat ( Off / Single / All ):
Off: Resumes normal playback.
Single: Repeats the current track/file.
All: Repeats all files on the current folder or all tracks on the disc.
• Mode ( Normal / Shuffle / Music intro ):
Normal: Resumes normal playback.
Shuffle: Playbacks track/file in random order.
Music intro (for Audio CD only): Only playbacks the first 10 seconds of all the tracks on the
current folder/disc.
• Edit mode: Program operation works only when "Edit mode" is selected.
• Program view: To view tracks/files in the "Program view" list. It is disabled when the "Program
view" list is empty.
• Add to program: Add files/tracks to the "Program view" list. It is disabled if the "Edit mode" is
not selected.
• Browser view: To view files/tracks in the original view list.
• Clear program: Delete the files/tracks in the "Program view" list.
Select a file/track or more you want to delete in complete stop mode (press the STOP
button twice). "
" will appear beside the deleted file/track. Select "Clear program" and then
press the ENTER button. It is disabled if the "Edit mode" is not selected.
Note: The program will be deleted if the STOP button is pressed twice, the disc door is
opened, or selected files are deleted by selecting "Clear program".
Adjust the LCD Screen
You can adjust brightness, contrast, color or
view mode of the LCD screen.
1. Press the TV MODE button.
2. Press the / button to select Brightness,
Contrast, Color or View Mode.
3. Then press the / button to change the
setting. (For View Mode, press the ENTER
button to change the setting.)
4. Press the TV MODE button to exit the menu.
Sequence of angle shots
(Example)
Notes:
• If the title or chapter numbers you entered is not permited by the DVD, after you press the
ENTER button, it will restore to - - -. You should re-enter correct numbers.
• Some discs may not permit memory playback operation.
• If you select repeat during memory playback, the DVD player repeats the current memory
playback.
• If you press the MEMORY button while the display appears on the TV screen, the display disappears.
• The programmed selections will be cleared when you open the disc tray or turn off the DVD player.
You can play a specific title or chapter repeatedly. (Title repeat, chapter repeat, A-B repeat)
CUSTOMIZING THE FUNCTION SETTINGS
This owner’s manual explains the basic instructions for operating this unit. Some
DVDs are produced in a manner that allows specific or limited operation during
playback. Therefore, this unit may not respond to all operating commands. THIS IS
NOT A DEFECT. Please refer to the instructions accompanying the specific DVD in
question for more information about the options available on that DVD.
“
” may appear on the screen during operation. A “ ” means that the desired
operation is not permitted by the unit or disc.
Playing a Disc
1. Slide the (CHARGE) / STANDBY / ON
switch to the ON position.
See CUSTOMIZING THE FUNCTION
SETTINGS before proceeding to step 2.
2. Press the OPEN
button and hold the
front panel to open
the disc door.
3. Hold the disc by its
sides and gently push
it onto the spindle with
label side facing towards you until you hear
a “click”.
4. Gently push the disc door closed. It takes a
short while for your unit to load the disc. After
loading, for most DVDs, the unit will
automatically take you main menu or start
playing. If the unit does not automatically start
playing the DVD, press the
PLAY button.
Pausing Playback (Still Mode)
Press the PAUSE button. To resume normal
playback, press the
PLAY button.
Each time you press the PAUSE button, the
picture advances one frame.
Stopping Playback
Press the STOP button at the location where
you want to interrupt playback. To resume
playback at the position where the disc was
stopped, press the
PLAY button.
If you press the STOP button twice, the unit’s
memory will be cleared and pressing the
PLAY button will reset the disc to the beginning.
Fast Forward / Fast Reverse
1. Press the SEARCH or SEARCH
button when a disc is playing. Each time you
press the SEARCH
or SEARCH
button, the playback speed changes in the
following sequence:
2. Press the PLAY button when you reach
the desired point to resume normal playback.
Notes:
• The DVD player mutes sound and subtitles
during reverse and forward scan of DVDs.
• The fast playback speed may differ
depending on the disc.
Skip (Forward / Reverse)
• Press the PREV button to go back to
current or previous chapters/tracks.
• Press the NEXT button to advance
chapters/tracks.
• For audio CDs, use the number buttons on
the remote control to jump immediately to the
desired track number.
Audio Selection
On some DVDs, the sound is recorded in two or
more formats. Follow the directions below to
select the preferred
language and sound
system.
1. While a disc is playing, press the AUDIO
button to show the current audio format
number.
2. Press the AUDIO button repeatedly to select
the desired audio format.
Notes:
• If only one audio format is recorded on the
DVD, the number does not change.
• Some DVDs allow you to change audio
selections only via the disc menu. If this is
the case, press the MENU button and choose
the appropriate language on the disc menu.
• You can select different audio channels
(Stereo, Left or Right) on an Audio CD by
pressing the AUDIO button repeatedly.
Subtitle Selection
1. While a DVD is playing, press the SUBTITLE
button to display the current
language setting, as shown in
the example.
PLAYING A DISC
OSD Language
1. Press the SETUP button in stop mode.
2. Press the button to select OSD Language.
3. Press the ENTER button, then the / button to shift and
change the Language.
4. Press the ENTER button.
5. Press the SETUP or RETURN button to exit the menu.
Subtitle
1. Press the SETUP button in stop mode.
2. Press the button, then the / button to select Subtitle.
3. Press the ENTER button, then the / button to shift and
change the Language.
4. Press the ENTER button.
5. Press the SETUP or RETURN button to exit the menu.
Notes:
• Some DVDs may be set to display subtitles in a language other than the one you selected. A
prior subtitle language may be programmed on the disc.
• Some DVDs allow you to change subtitle selections only via the disc menu. If this is the case,
press the MENU button and choose the appropriate subtitle language from the selection on
the disc menu.
Audio
1. Press the SETUP button in stop mode.
2. Press the button, then the
/ button to select Audio.
3. Press the ENTER button, then the / button until your
preferred Audio is displayed.
4. Press the ENTER button.
5. Press the SETUP or RETURN button to exit the menu.
Aspect Ratio
1. Press the SETUP button in stop mode.
2. Press the
/ button to select Video.
3. Press the button, then the / button to select Aspect Ratio.
4. Press the ENTER button, then the / button to shift and
change the aspect ratio.
5. Press the ENTER button.
6. Press the SETUP or RETURN button to exit the menu.
Notes:
• The displayable picture size is preset on the DVD. Therefore, the playback picture of some
DVDs may not conform to the picture size you select.
• When you play DVDs recorded in the 4:3 picture size only, the playback picture always appears
in the 4:3 picture size regardless of the Aspect Ratio setting.
• Select 16:9 to conform the LCD screen on the unit. Always be sure that your Aspect Ratio
conforms to the actual TV in use if you connect the unit to a TV.
View Mode
1. Press the SETUP button in stop mode.
2. Press the
/ button to select Video.
3. Press the button, then the / button to select View Mode.
4. Press the ENTER button, then the / button to shift and
change the View Mode.
5. Press the ENTER button.
6. Press the SETUP or RETURN button to exit the menu.
Fill Fill the screen with decoded image.
Original Display image as it’s original size.
Auto Fit Automatically fit the decoded image on screen without distortion. Black bars will be
present on top/bottom or left/right of screen.
Pan Scan Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your
TV screen. Sides of the picture are cut off.
Note: Depending on the DVDs, you may not be able to view the mode as selected.
Language
Video
Use Default Settings
1. Press the SETUP button in stop mode.
2. Press the / button to select Misc.
3. Press the button, then press the /
button to select “Use
Default Settings” dialogue box.
4. Press the ENTER button then press the / button to select
“Yes”. Press the ENTER button. The original setting will be
restored. The unit will exit setting menu automatically and re-
load the disc in the disc tray.
Misc
2. Press the SUBTITLE button repeatedly to
select the desired subtitle language. You can
turn subtitles off by pressing the SUBTITLE
button repeatedly until the “
Off ” is
displayed.
Notes:
• Some DVDs are set to display subtitles
automatically, and you cannot turn them off
even if you set the subtitle function to off.
• During some scenes, the subtitles may not
appear immediately after you select your
desired scene.
• The number of subtitle languages recorded
differs depending on the disc. If only one
language is recorded, the language does
not change.
• This function can only be used for discs on
which subtitles have been recorded in
multiple languages.
• Some DVDs allow you to change subtitles
only via the disc menu. If this is the case,
press the MENU button and choose the
appropriate subtitle on the disc menu.
Angle Selection
Some DVDs contain scenes which have
been shot from a number of different angles.
For these discs, the same scene can be
viewed from each of these different angles.
1. While you are playing a DVD with different
angles recorded, press the ANGLE button
to view the number of current angles
available.
2. Press the ANGLE button repeatedly to
change the scene to the next recorded
angle.
• After approximately two seconds, playback
will continue from the new angle you
selected.
• If no button is pressed within 10 seconds,
playback continues without changing the
current angle.
Notes:
• This function can only be used for discs on
which scenes shot from multiple angles
have been recorded.
• If only one angle is recorded, “ 1/1 ” is
displayed.
Display Function
While the disc is playing, press the DISPLAY
button repeatedly to display information on
operation status.
Elapsed Time:
Elapsed time from the beginning of the title
which is currently playing.
Remain Time:
Remaining time of the title which is currently
playing.
permited by the DVD, after you press the
ENTER button, it will restore to - - -. You
should re-enter correct numbers.
• Some discs may not respond to this
process.
• This method of locating a chapter is
available only on a DVD that contains
chapter numbers.
Locating a Specific Time
You can move to a specific location by entering
its corresponding time (hours, minutes,
seconds).
1. Press the GOTO button.
2. Press
or button to display Time and
press the corresponding number buttons for
the setting point you want.
3. Press the ENTER button to confirm.
Playback starts from the selected section.
Notes:
• If the time numbers you entered is not
permited by the DVD, after you press the
ENTER button, it will restore to - - : - - : - .
You should re-enter correct numbers.
• Some discs may not respond to this
process.
• Some scenes may not be located as
precisely as you specified.
• This method for accessing specific locations
is available only within the current title of
the DVD.
Note: It will take 3-5 seconds to reset the DVD player to the factory default.
Screen Saver
1. Press the SETUP button in stop mode.
2. Press the / button to select Misc.
3. Press the button, then press the / button to select Screen
Saver.
4. Press the ENTER button, then press the / button to change
the On/Off mode.
5. Press the ENTER button.
6. Press the SETUP or RETURN button to exit the menu.
Note: Some DVDs may not include your pre-selected language. In this case, the DVD player
automatically displays disc menus consistent with the disc's initial language setting.
DVD Menu
1. Press the SETUP button in stop mode.
2. Press the button, then the
/ button to select DVD Menu.
3. Press the ENTER button, then the / button until your
preferred DVD Menu language is displayed.
4. Press the ENTER button.
5. Press the SETUP or RETURN button to exit the menu.
Note: Some DVDs may not play in the language you selected. A prior language may be
programmed on the disc.
TROUBLESHOOTING GUIDE
SYMPTOM CAUSE (AND REMEDY)
• Ensure the car power adapter is connected.
• Make sure that the unit is turned on.
• Make sure that you select ON mode.
• Make sure the unit is not paused. Press the
PLAY button.
• Make sure the unit is not in fast-forward or fast-reverse mode. Press
the PLAY button.
• Make sure the AUDIO/VIDEO input/output connections are correct.
• The DTS DVD cannot be decoded to have speaker output.
• The unit has overheated. Shut it off for 30 minutes to allow it to cool
down.
• The region number of the disc doesn't match the region number of
this unit.
• The DVD is dirty. Gently clean the disc.
• The disc is scratched.
• Please adjust the LCD's brightness, contrast and color using the TV
MODE button on the remote control.
• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened
with alcohol.
• Clean the disc.
• There is no disc inside the unit ("No Disc" appears on the screen).
• Insert the disc correctly with the graphics facing up.
• Clean the disc.
• A non-NTSC disc has been inserted, or the disc region number does
not match the region number of the unit.
• Condensation may have formed inside the unit due to a sudden
change in temperature. Wait about an hour for it to clear and try again.
No power.
Very little or no sound
is coming from a DVD.
No picture.
The picture is not clear.
Loud hum or noise is
heard.
The disc does not play.
Specifications and external appearance are subject to change without notice.
811-637091W010
Printed in China