Vizio VOJ320F1A User Manual
Page 28
VIZIO VOJ320F1A User Manual
Version 8/25/2008
28
www.VIZIO.com
2.7.1 Optical Output of Audio received
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical AUDIO
OUT (white area) at the rear of the VOJ320F1A.
1.
Turn off the power to the LCD HDTV and
Receiver/Amp.
2.
Using an SPDIF cable, connect the cable to the
audio input connector on the Receiver/Amp and
connect the other end to the OPTICAL OUT (white
area) audio connectors at the rear of the LCD
HDTV.
3.
Turn on the power to the LCD HDTV and
Receiver/Amp.
4.
Then press the
button on the remote
control to open the On-Screen Display (OSD)
menu.
5.
Press the on the remote control to select
the Audio Adjust menu.
6.
Press the on the remote control to select
SPEAKERS.
7.
Press the on the remote control to select
OFF so that the sound from the LCD HDTV will
now be routed through your Receiver/Amp
system.
Press the LAST key once to return to the previous screen or repeatedly to return to your program if task
has been completed.
Note:
a)
Refer to your Receiver/Amp user manual to select the corresponding audio input.
b)
The audio output is not amplified and cannot be connected directly to external speakers.