Verilux CLEANWAVE UV-C - Manual (Page 3)

6
EMPTYING THE DUST BIN AND CLEANING THE DUST FILTER
ATTENTION: Please ensure that the power is off when performing any
maintenance operation.
1. To turn off the power, step
gently on the switch.
2. Leave the Sweeper on
the fl oor and carefully pull
upward to remove the dust
bin and fi lter.
3. Separate the fi lter unit from
dust bin and gently clean
fi lter cover.
4. Carefully empty dust bin
into trash receptacle.
5. Replace dust bin and fi lter
prior to using Sweeper.
CLEANING BRUSH ROLL
1. Use screwdriver (not included) to open the brush cover.
2. Carefully pull brush roller up
and move transmission belt
to the outside, allowing the
brush roller to be lifted out for
cleaning.
3. Remove hair and fi ber from
the brush roll.
4. Reassemble unit as before.