Vizio VO22L - Manual (Page 49)

VIZIO VO22L FHDTV10A User Manual
Version 9/9/2008 49
www.VIZIO.com
3.4 DTV / TV Tuner Setup
When you first used your VO40L FHDTV10A you will have setup your TV for DTV / TV channels using the
Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV
TUNER SETUP menu.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
3.4.1 Tuner Mode
When the button is pressed, the On Screen
Display (OSD) appears on the PICTURE
adjustment page. Press the button to display
the TV page.
Press the
button to highlight the Tuner Mode
selection.
Press the
button to choose Cable or Air
(Antenna) depending upon which equipment you
have attached to the DTV / TV Input.
Once the adjustments are completed press the
LAST button repeatedly to exit the OSD completely.
3.4.2 Auto Search
Press the button to highlight the Auto Search
selection.
Press the
button to Auto Search for TV
channels available. The TV will automatically
search for analog and digital channels.
Once the adjustments are completed press the
LAST button repeatedly to exit the OSD
completely.
3.4.3 Skip Channel
After the TV has stored all of the available DTV channels in memory you will find that some channels will
be too weak to watch comfortably or they may be channels you do not want to see. Select the channel
you wish to remove, press the .
Press the buttons to open the TV TUNER SETUP menu.
Press the button to highlight SKIP CHANNEL.
Press the button to select this channel to be skipped when using the CH+ or CH- button. You will still
be able to select this channel using the number buttons on the remote control.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.