Overview – Veo Pan and Tilt User Manual
Page 6
Network Camera User’s Guide
6/95
Overview
This user’s guide explains how to operate the Network Camera from a computer.
Basically, the user’s guide is written to be read on the computer display. However, users
might consider printing it out to access easily and read it before you operate the Network
Camera.
Introduction
This Network Camera is an inexpensive fully scalable surveillance technology. Because
the Network Cameras can be plugged in to your existing computer network infrastructure,
you will potentially save thousands of dollars on unnecessary cabling.
The Network Camera is accessible via the LAN or Internet connection. Connect your
Network Camera directly to a computer network or DSL modem, and with a standard
Web browser you get instant, on demand video streams. Within minutes you can set up
the Network Camera to capture a video sequence to a PC. Live video image can be
uploaded to a website for the world to see or made available only to select users on the
network.
Features:
z
High quality 1/3” CCD sensor
z
Composite video output
z
Motorized and wide-range pan and tilt operation
z
16 Preset Points
z
JPEG video compression
z
Built-in internal microphone
z
Remote-Control via Internet Explorer
z
Support statistic and dynamic IP address
z
DDNS and PPPoE
z
CF memory card interface (for CF card enabled version only)
z
Multi-channel control software for surveillance application
z
On-line firmware upgrade