Display refrigerators long-door – Victory Refrigeration DRSA-2D-S7-LD User Manual

Page 2

Advertising
background image

DISPLAY REFRIGERATORS LONG-DOOR

Copyright February 2012

Printed in USA

We reserve the right to change specifications and product design without notice. Such revisions do not entitle the
buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.

Dimensional tolerances +/-

1

4

”. Metric dimensions (MM)

CABINET CONSTRUCTION
The cabinet front and doors are constructed of heavy gauge, polished stainless steel to
maintain an attractive appearance after years of heavy use. Polyurethane foam insula-
tion throughout ensures the ultimate in energy efficiency. The front shroud lifts up for
easy access when cleaning the condenser unit.

DOOR CONSTRUCTION
The self-closing, sliding glass doors are double pane, tempered glass with a Low E
factor. The doors have a “hold-open” device to facilitate product loading.

REFRIGERATION SYSTEM
All components of the high efficiency, air-cooled, self-contained refrigeration system are
mounted on top of the cabinet out of the food storage zone providing greater usable
storage space. Environmentally friendly R-134a refrigerant is efficiently metered by a
capillary system providing a constant, safe operating temperature and quick “recovery”
under the most demanding conditions. The hermetically sealed systems are designed
to operate at 38°F. Each cooling coil has plasticized fins to resist food acids and dual-
speed EC fan motor(s) for greater cooling capacity and efficiency. All condensate water
is disposed of automatically by the energy efficient, non-electric condensate evaporator.

INTERIOR STORAGE ARRANGEMENTS
Each cabinet section is provided with three heavy-duty, epoxy coated wire shelves. The
shelves are adjustable in one inch increments. Solid doors have a wide door opening
for use with a variety of optional pan slide configurations including 18” x 26” and 14” x
18” pans.

Note: 12” x 20” pans do not fit through the sliding glass doors.

V-TEMP

TM

CONTROL SYSTEM

The easy to use V-TEMP™ Control is provided standard with a two year parts and labor
warranty. This durable, water resistant microprocessor monitors and controls the entire
temperature maintenance process. It includes an ON/OFF switch, manual defrost, inte-
rior light switch, LED temperature indicator in °C or° F, a HI/LO audio/visual temperature
alarm , power supply interruption, door ajar and “clean condenser” alarms. A manager’s
“lock-out” feature is provided to safeguard pre-determined control settings. A HAACP
Event Indicator/Memory feature announces and records up to nine (9) alarm events.
Unique to the V-TEMP™ are two standard modes of operation:

CHARACTERISTICS

2 SECTION

Reach-In

2 SECTION

Pass-Thru

DIMENSIONAL DATA
Capacity Net (cubic ft.)
Width, Overall (in.)
Depth, Overall (inc. handles)
Clear Sliding Door Height (in.)
Clear Sliding Door Width
Height Overall (inc. 6” legs)
No. of Shelves
Shelf Area (square ft.)

ELECTRICAL DATA
Cabinet Voltage
Feed Wires
Condensing Unit Voltage
NEMA Plug
Total Amperes

REFRIGERATION DATA
Condensing Unit Size
Refrigerant

1

2

HP

R-134a

3

4

HP

R-134a

84

1

2

84

1

2

59

1

4

59

1

4

43
43

124.59
124.59

529
529

115/60/1
2
115/60/1
5-20P
10.7

115/60/1
3
208-230/60/1
NO
8.8

46.5
52

1

8

33

1

8

52

1

2

19

1

2

84

1

4

6
33.2

46.5
52

1

8

35

1

4

52

1

2

19

1

2

84

1

4

6
33.2

NOTE: Plug style, voltage and full load amps may vary depending on
certain options selected such as optional voltages and compressor upgrades.

REMOTE APPLICATIONS: See form V-RRDS1 for details of remote refrigeration
characteristics by model.

NOTE: In order to provide peak operating performance the cabinet must
have a 2 inch all around clearance and 12 inches above the top of the
condensing unit. This ensures an adequate air supply and space for routine
maintenance and/or service if required.

CRATED DIMENSIONS & WTS.
ONE SECTION
TWO SECTION

HT.

WIDTH DEPTH

FT³

LBS

SUPERCOOL

- Provides a lower “set-point” refrigeration condition for a set period

of time when food has just been loaded into the refrigerator and needs to be quickly
brought back down to a safe temperature.

ENERGY SAVER

- The cabinet automatically reverts to the energy saving mode

when there are no door openings for four hours.

A

FLEXTEMP

mode of operation is available as an option.

FLEXTEMP

provides

the ability to select a unique temperature from 28°F to 40°F. This optional feature is
ideal for seasonal menu changes and items with specific temperature requirements for
dairy, meat, fish or poultry.

Advertising
This manual is related to the following products: