Vantec Jukebox - Manual (Page 7)

1. Use as External USB HDD
1.1 Insert Hard Disk
9 Only compatible with 2.5” IDE Hard Disk for Laptop(or Notebook) PCs.
9 Hard Disk should be “Master”. However, if the Hard Disk supports “Single” mode, you need to try to set
“Single “mode. You should not need to change the setting under most conditions.
② Pull the PCB out. ③ Grip HDD and insert it into
the pins of PCB (be sure to
align the 44 pins)
① Grip the handles on the front
panel and pull back to remove,
then open the top cover.
④ Secure HDD onto PCB by
using the supplied screws.
⑤ Insert the PCB into the case,
and then close the top cover
and secure the front panel.
6