Verizon LG-TM510 - Manual (Page 27)

40 41
1) Press and in order.
2) Select (multiplication) using .
3) Press , , and , in order.
4) Select using Soft Key 1.
Then you will see the result of the calculation, 2500.
Security (Menu )
Press Soft Key 1 Menu and select Security. Enter
your default lock code (last four digits of mobile phone
number or 0000). Select
New Lock Code. Enter the
new four-digit lock code of your choice. For confirmation,
the phone will prompt you to enter the New Lock Code
again.
Lock Mode (Menu )
Helps you to protect your phone from unauthorized use
and once the phone is locked, the phone is restricted
from making most calls until the lock code is entered.
You can still receive phone calls and make emergency
calls while your phone is locked. Never means that the
phone is never locked. When locked, you can only
make emergency calls or receive incoming calls. On
power up means that the phone is locked when it is
turned on. Always means that the phone is always
locked.
Restrict (Menu )
Press Soft Key 1 Menu . Press Security. Enter the
four-digit lock code. Then press Restrict. Then set
the call restriction to Yes or No (using ). Press Soft
Key 1 Ok .
If you set it to Yes you can only place calls to emergency
numbers and phone numbers stored in the memory
locations.
You can still receive calls in the restrict mode.
Clear Call (Menu )
Allows you to delete all the telephone numbers saved
in the Call History.
Press Soft Key 1 Menu . Press Security. Then
enter the four-digit lock code. Press Clear Call.
Select Yes using . then press Soft Key 1 Ok .
Clear Data (Menu )
Deletes all information saved in memory locations (001-
199), schedule and message. (Entry 9 is reserved for
emergency calls.) Be careful since any deleted information
is not recoverable.
Emergency # (Menu )
Allows you to enter 3 emergency numbers (Edit
enter number
Save ). You can call these
numbers and 911 even when the phone is locked or
restricted.
New Lock Code (Menu )
New Lock Code allows you to enter a new four-digit lock
code number. For confirmation, it will ask you to enter
the new lock code twice. This is the same number as
the pin code.