VTech DS6421-4 - Manual

Bluetooth quick start guide
DS6421-2/DS6421-3/DS6421-4
Pair and connect your first Bluetooth
cell phone
Before you begin, make sure you have cellular
coverage and your Bluetooth enabled cell phone
is not connected to any other Bluetooth device.
To pair and connect your first Bluetooth cell phone:
Press MENU .
Press or to highlight Bluetooth,
then press SELECT .
Press SELECT to choose Add device.
Press SELECT to choose Add cellular.
When the screen displays 1. If cell
is connected to BT device, please
disconnect it., press NEXT .
When the screen displays 2. Place
cell phone next to base., press
NEXT to set the telephone base to
discoverable mode.
The handset displays Set cell to search
base: VTech DS6421 discoverable
PIN:0000. Promptly turn on the
Bluetooth feature of your cell phone and
search for or add new devices.
1.
2.
3.
4.
5.
6.
7.
Refer to your user’s manual for complete feature instructions.
The pairing process may take up to one minute. If the pairing
process fails, try again.
If you put the handset back in the telephone base or charger
while pairing, the process stops and the handset returns to
idle mode.
•
•
•
Pair and connect your first Bluetooth
headset
Before you begin, make sure your Bluetooth
enabled headset is not connected to any other
Bluetooth device.
Bluetooth headsets can only be used for calls on the
home line.
To pair and connect your first
Bluetooth headset:
Bluetooth setup
To use a Bluetooth enabled cell phone or headset with your
DS6421, you must first pair and connect your Bluetooth
device(s) with the telephone base. All DS6421 handsets can
be used to make or answer calls on the cell phone line.
Bluetooth wireless technology operates within a short range
(a maximum of approximately 30 feet). When you pair a
Bluetooth cell phone or Bluetooth headset to the telephone
base, make sure your Bluetooth device is close to the
telephone base to maintain sufficient signal strength.
Keep your Bluetooth device close
to the telephone base to maintain
a reliable connection.
Once your cell phone finds your VTech phone, press
the appropriate key on your cell phone to continue the
pairing process.
Enter the PIN of the telephone base (the default PIN is
0000) into your cell phone.
When successfully connected, the handset displays
briefly Adding Cell Phone A to device list... and then
Cell Phone A is added and connected to base., and
then returns to idle mode.
The corresponding device light ( D1 or D2) on the
telephone base turns on.
If you have trouble pairing your cell phone, it may not
be compatible with your DS6421. Check the Bluetooth
compatibility list at www.vtechphones.com.
8.
9.
10.
i
i
Answering sys
Directory
Caller ID log
Intercom
Bluetooth
BACK SELECT
BLUETOOTH
Add device
Device list
Download dir
Change PIN
BACK SELECT
ADD DEVICE
Add cellular
Add headset
BACK SELECT
1. If cell is
connected to BT
device, please
disconnect it.
NEXT
2. Place cell
phone next to
base.
BACK NEXT
Set cell to
search base:
VTech DS6421
discoverable
PIN:0000
g
Adding
Cell Phone A
to device
list...
Cell Phone A
is added
and connected
to base.
HANDSET
12:30 pm 12/25
MENU
1
X
g
Answering sys
Directory
Caller ID log
Intercom
Bluetooth
BACK SELECT
BLUETOOTH
Add device
Device list
Download dir
Change PIN
BACK SELECT
Press MENU .
Press or to highlight Bluetooth
then press SELECT .
Press SELECT to select Add device.
1.
2.
3.
The steps for the pairing process may vary for different cell
phones. If this happens, follow the prompts on your cell phone
and your DS6421 to complete the pairing process.
Refer to the user’s manual of your cell phone on how to search
for or add a new Bluetooth device.
•
•