Vizio M220NV - Manual (Page 28)

VIZIO M220NV User Manual
28
www.VIZIO.com
COMPUTER
Using HDMI
1. Turn off your HDTV and computer.
2. Connect a HDMI cable to the HDMI output of your computer and the other end to the HDMI 1 or
jack on your HDTV.
3. Connect the 1/8-inch audio cable from your computer to the RGB PC Audio jack on your HDTV.
This step is optional and only needed if you want to transmit audio from the computer through the
TV.
4. Turn on the power to your HDTV and your computer.
5. Select
HDMI-1 or HDMI-2 using the INPUT button on the remote control or side of the TV.
Ethernet Connection
The Ethernet function on your HDTV is used to access the Internet. Your HDTV also has 802.11n single-
band wireless, so you can connect your TV through your wireless home network. A wired connection can
sometimes deliver a more consistent connection depending on the conditions in your home environment.
. See the Network Menu on page 44 for detailed information on setting up your Internet connection.
1. Connect one end of an Ethernet cable (not supplied) to the Ethernet jack on your TV.
2. Connect the other end of the Ethernet cable to your home network (usually your router). Your
home network must have broadband Internet access such as cable or DSL.
a. A small number of users may need to manually adjust the network settings. See the
Network Menu on page 44 for detailed information on configuring your Internet
connection.
b. If you need additional help setting up your network, please refer to the user manual for
your router or contact the manufacturer of either your router or your Internet service
provider if they provided the router for you.