Setting the temperature control – Vinotemp Portofino User Manual

Page 22

Advertising
background image

22

W W W . V I N O T E M P . C O M

SETTING THE TEMPERATURE CONTROL

FOR EACH ZONE USING MECHANICAL CONTROL KNOB


To control the internal temperature,
adjust the control dial to achieve your
desired temperature.
Temperature can be adjusted from
Max Temp (Big Snowflake) to Min
Temp (Small Snowflake).
For glass door units, the temperature
control is approximately 50-65°F.
(For solid door units, the temperature
control is approximately 47-65°F.)
To turn off the appliance, turn both
temperature controls to minimum
setting (small snowflake) and unplug
the appliance.
Turning the temperature control to
the “minimum” position can stop the
cooling cycle of the corresponding
chamber, but does not cut off the
power to the appliance.
It is recommended that you to install
the appliance in a place where the
ambient temperature is between 72-
78 degrees Fahrenheit. If the ambient
temperature is above or below the
recommended temperatures, the
performance of the unit may be
affected. For example, placing your
unit in an extreme cold or hot
condition may cause interior
temperatures to fluctuate. The
desired temperature range may not
be reached.




Mechanical Control Knob

Please allow 24-48 hours minimum
for wine/cooler to reach proper
temperature after first starting.



Advertising