Venturer SHD7000 - Manual (Page 17)

- 16 -
Turning on the Unit and TV
1. Press the STANDBY/ON button to turn on the unit. The STANDBY/ON indicator will turn off.
2. Turn on the TV by pressing its POWER button.
3. Select the channel on your TV corresponding to the VIDEO IN jack that the unit is connected to. See TV
User Guide for more information.
• If you have connected the unit successfully, the DVD logo (start-up picture) will appear on your TV
screen.
Plugging in the Unit
After completing all connections, connect the supplied power cord to the AC IN socket then plug the AC
power cord into the wall outlet.
While the AC power cord is connected, the unit is on standby and the STANDBY/ON indicator on the unit
illuminates in red.
• Before plugging in the power cord, make sure the voltage of the unit matches your local voltage.
• Ensure all the components are connected correctly.
• When you are not going to use the unit for a long period of time, disconnect the power cord.
Caution
• When plugging or unplugging the LAN cable, hold the plug portion of the cable.
• When unplugging the LAN cable, do not pull on it. Unplug the cord while pressing down on the lock.
• Do not connect a modular phone cable to the LAN port.
• Since there are various connection configurations, please follow the specifications of your telecommu-
nication carrier or internet service provider.
Note:
• Depending on the internet service provider (ISP), the number of devices that can receive internet
service may be limited by the applicable terms of service. For details, contact your ISP.
SETUP