Vizio M420VT - Manual (Page 26)

VIZIO M420VT User Manual
Connecting a PC (Computer)
26
1. Turn off the power to the LCD HDTV and Personal
Computer.
2. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your computer and the other
end to the RGB PC input (blue area) at the rear of the LCD HDTV.
3. Using a 1/8” stereo cable, connect the Audio Out on your computer to the RGB PC Audio
input (blue area) at the rear of the LCD HDTV.
4. Turn on the power to the LCD HDTV and Personal Computer.
5. Select RGB using the INPUT button on the remote or side of the LCD HDTV.
Note:
• For a better picture quality when connecting a personal computer through RGB PC, set your
computer timing mode to VESA 1920x1080 at 60HZ.
• Refer to your computer user manual for more information about the video output requirements of
the product.
• A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at an
electronics store.
www.VIZIO.com