Visioneer 9650 - Manual (Page 101)

94 V ISIONEER 9650 S CANNER U SER ’ S G UIDE
The Folders pane (which shows folders for organizing your scanned
images) is replaced by the Scan pane.
3. Click the Scanner drop-down arrow, and select TWAIN: Visioneer
9650 from the drop-down list.
Note: Please wait a few moments for your selection from the drop-
down list to become active. This delay only occurs the first time you
select from the list while PaperPort initializes the scanner. Later on,
the scanner initializes immediately when you select it from the list.
Note: If the Scan button at the bottom of panel is not available when
you make a selection from the Scanner drop-down list, then PaperPort
needs to be setup to work with your scanner. See the section, “Setting
Up PaperPort to Work with Your Scanner” on page 114.
Scan pane.
If this Scan button is not active, see the section on page 114
to setup PaperPort to work with your scanner.
Click the arrow to see
the list of scanners.