Replacement parts, Specifications – Vector Compact Pro VEC020C User Manual

Page 11

Advertising
background image

11

7.

REPLACEMENT PARTS

For replacement parts (bulbs, batteries, fuses, etc.), contact Vector Customer Service:

(954) 584-4446 or toll-free (866) 584-5504.

7.1

BULB REPLACEMENT

Tools needed - small Phillips screwdriver.
1. Unscrew (counterclockwise) and remove two Phillips screws.

2. Remove the lens cover.

3. Remove the burned-out bulb.

4. Replace with a new bulb (12-volt 0.2 amp Krypton bulb).

5. Snap the lens cover back into place.

6. Replace (clockwise) the screws and carefully tighten. Do not over tighten!

7.2

BATTERY REPLACEMENT

It is recommended that the unit be returned to Vector Customer Service for battery replacement:

Contact (954) 584-4446 or toll-free (866) 584-5504 ext.19.

WARNINGS:

• Do not dispose of the battery in fire as this may result in an explosion

• Before disposing of the battery, protect exposed terminals with heavy-duty electrical tape to

prevent shorting (shorting can result in injury or fire)

• Do not expose battery to fire or intense heat as it may explode

7.3

BATTERY DISPOSAL:

This unit contains a maintenance-free,

non-spillable, sealed lead-acid battery–this battery is fully

recyclable and should be accepted at any location that accepts common automotive starter batteries.

Examples of places that accept these batteries are: County or municipal recycling drop-off centers,

scrap metal dealers and retailers who sell automotive replacement lead acid starter batteries. For

more information on recycling this battery, call toll-free 877/288-7722.

8.

SPECIFICATIONS

Model ..................................................................................... VEC020C Voltage 12 VDC

Boost Power ................................................................ 350 Instantaneous Cranking Amps

Peak Ampere Power ........................................................................................ 900 Amps

Battery Type .......................... Sealed, high energy density, AGM, lead-acid, rechargeable,

............................................................. maintenance-free, 12 volt DC, 15 Amp-hour

Bulb ......................................................................................... 12 Volt 0.2 Amp Krypton

Booster Cables .................................#6AWG welding cable with 350 Amp copper clamps

Accessory Socket.............................................................. Self-Resetting Breaker 20 Amps

Charging Cord ................................................................................................12 Volt DC

Adapter/Charger ...................................... 110/120 Volt AC(500mA, 12 Volt DC Output)

Reverse Polarity Detection .......................................................................... 1.5 Volts (min)

HEIGHT ................................................................................................ 8.5 in. (21.6 cm)

DEPTH .....................................................................................................8.25 in (21 cm)

WIDTH ....................................................................................................9.8 in(24.9 cm)

WEIGHT ............................................................................................. 12.5 Lbs (5.67 Kg)

Advertising