Vizio M260MV - Manual (Page 12)

VIZIO M260MV User Manual
12
www.VIZIO.com
Chapter 3 VIZIO Remote Control
Installing the Batteries
1. Remove the battery cover.
2. Insert two AAA batteries into the remote control.
Make sure that you match the (+) and (-) symbols on
the batteries with the (+) and (-) symbols inside the
battery compartment.
3. Replace the battery cover.
Precautionary Tips for Inserting the Batteries:
 Only use Alkaline AAA batteries.
 Do not mix new and old batteries. This may
result in cracking or leakage that may cause a fire or lead to personal injury.
 Inserting the batteries incorrectly may also result in cracking or leakage that may cause a
fire or lead to personal injury.
 Dispose of batteries according to local hazardous waste regulations.
 Keep the batteries away from children and pets.
Remote Control Range
 Point the remote control directly at this sensor
for the best response to the remote signal.
 Do not place any obstacles between the remote
control and the remote control sensor.
 The effective range of the remote control is
approximately 22 feet (7 meters) from the front
of the remote control sensor, 30° to the left and
right, 20° up and down.
VIZIO Remote Control Precautions
 The remote control should be kept dry and away from heat sources. Avoid humidity.
 If the TV responds erratically to the remote control or does not respond at all, check the
batteries. If the batteries are low or exhausted, replace them with fresh batteries.
 When not using the remote control for a long period of time, remove the batteries.
 Do not take the batteries apart, heat them, or throw them into a fire.
 Do not subject the remote control to undue physical stress, such as striking or dropping it.
 Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean,
damp cloth.