Volvo 2001 S80 - Manual (Page 74)

2001 Volvo S80
Three seat positions can be programmed. To program a seat position:
1 Adjust the seat to the desired position.
2 Hold down the MEM button.
3 While holding down the MEM button, press button 1 to program the current position of the seat.
Buttons 2 and 3 can be programmed in the same way.
To move the seat to a programmed position, press and hold down button 1, 2 or 3 until the seat moves to
the preset position and stops.
As a safety precaution, the seat will stop automatically if the button is released before the seat has
reached the programmed position.
NOTE: The seat has an overload protector which engages if an object blocks the movement of the seat. If
this happens, remove the object and wait 20 seconds before operating the seat again.
* Only the driver's seat is equipped with the memory function.
pg. 49 Front seats, Coat hanger
Electrically operated seats - general information
Adjusting the front seats:
Passengers's seat: The passenger's seat can only be adjusted if the ignition key is in position I or II (see
page 48 ).
Driver's seat: The driver's seat can be adjusted if the ignition key is in position I or II (see page 48 ).
However, it can also be adjusted:
· Within 40 seconds after the ignition has been switched off (even if the key has been removed from the
ignition switch).
· Within 40 seconds after the driver's door has been unlocked with the key or remote control and opened.
file:///K|/ownersdocs/2001/2001_S80/01s80_04.htm (3 of 12)12/30/2006 3:48:18 PM