Vizio VW46L - Manual (Page 9)

VIZIO VW46L FHDTV10A User Manual
Version 12/7/2007 9
www.VIZIO.com
Chapter 1 Basic Controls and Connections
1.1 Front Panel
Power ‘VIZIO’ light – The VIZIO name lights white when
powered on and orange when powered off.
Remote Control Sensor – This is the window through which all
of the remote control signals pass to the sensor. Point the
remote control directly at this window for the best response to
the remote signal.
1.2 Right Side Panel Controls
POWER ( ) – Switch the VW46L FHDTV10A on by pressing the button once. Press the button again
to the VW46L FHDTV10A off.
MENU – This button activates the On Screen Display (OSD). If
a sub-menu is active, pressing this button will return to the
previous menu level.
CHANNEL +/- – Use these buttons to step up or down the TV
channels. While the OSD is active, these buttons function as
up and down controls in the OSD menus.
VOLUME +/- – Use these buttons to increase or decrease to
the speaker volume. While the OSD is active, these buttons
function as left and right controls in the OSD menus.
INPUT (ENTER) – Repeated
pressing of this buttons steps
through the input sources in
the following sequence: TV,
AV/S-Video, Component1,
Component2, RGB, HDMI1,
HDMI2, and HDMI3. Once
you have stepped through the
entire sequence, you will
return to the beginning.