Vizio VA19L HDTV10T User Manual

Page 12

Advertising
background image

VIZIO VA19L HDTV10T User’s Manual

Version 9/12/2008

12

www.VIZIO.com

WIDE – Cycle through the available screen formats (Wide, Normal, and
Panoramic). Note: in RGB/PC mode the options are 4:3 and 16:9.

SLEEP
– Press to select the sleep options from 30 to 120 minutes.

MTS
– Select the MTS option (Stereo, SAP, or Mono). In DTV mode,
select alternate audio channels, where available.

CC
– select the Closed Caption mode (OFF, CC1, CC2, CC3, or CC4).

TV
– Press to select TV mode.

AV
– Press repeatedly to cycle between AV1 and AV2 inputs.

COMPONENT
– Press to select the Component input.

HDMI
– Press repeatedly to cycle between HDMI 1 and HDMI 2 inputs.

RGB – Press to select an RGB component such as a computer.

MODE – Select the picture mode (Custom, Standard, Movie, or Game).

The following buttons are disabled because your HDTV does not have
those features:

! FREEZE

! PIP

! PIP CH

! AUDIO

! PIP INPUT

! PIP SIZE

! SWAP

! ZOOM



Remote Control Range

! The effective range of the remote control is approximately 26 feet (8 meters) from the front of the

receiver window and 13 feet (4 meters) when 30° to the left and right, 20° up and down.

! Point the remote control at the remote control sensor on the front of your HDTV to send

commands.

! Do not place any obstacles between the remote control and the remote control sensor.


VIZIO Remote Control Precautions

! Keep the remote control dry and away from heat sources. Avoid humidity.

! If your HDTV responds erratically to the remote control or does not respond at all, check the

batteries. If the batteries are low or exhausted, replace them with fresh batteries.

! When not using the remote control for a long period of time, remove the batteries.

! Do not take the batteries apart, heat them, or throw them into a fire.

! Do not subject the remote control to undue physical stress, such as striking or dropping it.

! Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp

cloth.

! Do not mix old and new batteries or different types of batteries.

Advertising