Vestax Mixing Controller - Manual (Page 2)

CONGRATULATIONS
Thank you for purchasing the VESTAX PMC -27MKII Professional Mixing Controller As
The top of the line, the PMC-27MKII is a high specification mixer designed to meet the most
professional requirements of the Dance Music DJ's.
Please read this owner's manual carefully before you start to use your mixer, so that you will
fully understand all of the special features and enjoy the full of use of the product.
F E AT U R E S
Three band isolator switch kills each frequency range completely in quick action.
Pre / Post selectable AUX send swich enables various effect processing. The effect signal can be controlled by
a dedicated return level control knob, the signal can be also monitored by headphone when "return" is selected
by cue button.
The new option meter allows DJs to monitor the cue signal visually. The tempo can be matched by eyes as well
as ears.
Three phono and 6 line inputs are provided to meet the new mixing style with various input source.
User replaceable 60 m/m input faders and 45 m/m cross fader make "on sight service" very easy. Optional
input rotary volume can be replaced with the fader for "House" application.
Line 4 input jack (RCA) is located on the top panel. This allows DJs to uae hand carried DAT or MD player
mixing with installed equipment.
I M P O R T A N T
To prevent electric shock, do not remove the cover. No user
serviceable parts are inside. Please refer servicing to a
VESTAX Authorized Service Center. Always disconnect all
equipment from the main supply when disconnecting or
reconnecting signal leads. The power cord should be
connected last. Make sure that the power switch is off when
connecting the power cord. Disconnect from AC supply when
equipment is not used for exlended amount of time.
W A R R A N T Y
The warranty might vary from country to country. Each
distributor has their own warranty system in accordance with
the country or state regulations or laws. VESTAX observes the
manufacturing coubtry s regulations.
P R E C A U T I O N S
Humidity and dust
Avoid use where there is high humidity and dust which may
cause damage to internal parts.
Temperature
Avoid use in hot, (over 35
)and cold, (boiow 5 )
locations. Keep the unit away from extreme direct heat such
as direct sunlight, heating radaitors, or closed vehictes.
Power cord handling
Connecting the power cord to other cords or joining cords
together can cause lire and electric shock. This is extremely
dangerous.
Take precaution when handling ACplugs and connectors.
Handle only the plug or connector and do not perfrom these
operations wiht wet hands.
Keep away from liquids
Do not stand cans contaning lipuids on or near the
equipment. If liquid enters equipment, disconnect the power
cord from the power outlet immediatcly.