Vestax DJ Effector - Manual (Page 5)

SIDE PANEL
4
CD PHONO
LINE
POWER INDICATOR
LED will light when the power is on.
MIX CONTROL
Slide to the left, EFFECT is active.
Slide to the right, NORMAL is active.
In the center position, mix of both.
PHASE MODE SELECT SWITCH
This switch is to select 3 types of phase mode.
(a) MONO PEAK -Single Peak type shifter to create
dynamic phasing sound.
(b) MONO DIP -Single Dip type shifter to create natural
phasing sound.
(c) STEREO DIP -Stereo Dip type phase shifter to create
ambient sound.
PHASE SHIFT SELECT SWITCH
Select the range of how deep the phase sound is out of 2,
4, 6, 8, 10, 12 steps.
BIAS CONTROL (AUTO MODE ONLY
The center of the frequency band in a shifted signal can
be moved from 10kHz to 100Hz and the LFO effect will be
active according to the setting.
DEPTH CONTROL AUTO MODE ONLY
This is to control the width of phasing from wide to narrow.
It adjusts the depth of modulation of the phase sound.
SPEED CONTROL AUTO MODE ONLY
The is to control the speed of phasing from fast to slow. It
adjusts the speed of the modulation of the phase sound.
AUTO / MANUAL SELECT SWITCH
Push in to activate AUTO MODE.
MANUAL CONTROL
For manual manipulation of the phase sound based on
the settings (3),(4).
INPUT SELECT SWITCH
PHONO(-46dB) / LINE(-10dB) / CD(0dB)
OUTPUT JACK [RCA pin jack]
INPUT JACK [RCA pin jack]
GND TERMINAL
Connect the ground cable here.
DC JACK
Vestax Adaptor DC-15V.