Venture Products VP100 - Manual (Page 14)

Page 14 / 22
5. D ISPLAYS DESCRIPTIONS
Standard display at start-up
After start-up, the display shows the volume (attenuation level)
of -66dB, and the first input is activated (RCA)
The volume can be modified through remote control or the
dedicated front knob, from –65dB (low volume) to 0dB (loud).
By using the remote control or selection knob, the different
inputs can be selected: RCA1, XLR2, RCA3, XLR4, RCA5,
XLR6, RCA7, XLR8, MM and MC.
MM input is selected as the 9
th
input of the preamplifier
(after XLR8)
MC input is selected as the 10
th
input of the preamplifier
(after MM)
By turning the Selection knob right, or using the remote control,
we process to the pink noise generator volume adjustment. It
shows initially the previous general volume level (before set-up).
Still turning right the Selection knob, we process to the channels
balance. Balance is limited to a 9dB difference between
channels. We start with left channel.
Still turning right the Selection knob, we process to right
channel.
Still turning right the Selection knob, we process to the
subwoofer crossover frequency selection. At start-up, default 50
Hz value is selected.
By turning right the Selection knob, we process to the subwoofer
volume selection. It will be set to match the mains speakers SPL
output level. At start-up – 69dB.