LELIT PL50N User Manual

Page 7

Advertising
background image

Pagina 7

English


29.

Push up the pump switch (22). The manometer (17) will show the reached pressure, between 8 and 14 bar.

30.

Once you get the desired quantity of coffee, push down the switch (22) again.

31.

Remove the filter holder (8) and throw away the used pod.


Steam:
32.

Check that the water tank (1) has been filled in with water by looking at the water level indicator (20).

33.

Press the on/off switch (11): the indicator light of the switch (11) and the indicator light (14) will come on. Do

this operation only if the machine is off. If it’s on pass to the following point.

34.

Position the lever switch (13) on steam mode (high).

35.

As soon as the light (21) comes on, the machine is ready for use.

36.

Push up the steam/hot water lever switch (4): the indicator light (12) comes on. First some water will flow out

and then the steam.

37.

Put the cup with the desired infusion under the steam tube (6).

38.

When the drink has been suitably frothed, push down the steam/hot water lever switch (4).

39.

IMPORTANT: after you have frothed your milk, position the steam switch (13) on hot water and follow the

instructions described under “Hot water” from point 44 in order to let some water flow out. This operation is
needed in order to restore the water circuit inside the machine’s tubes. At the end of this operation re-position
the switch (13) on coffee mode (down).


Hot water:
40.

Check that the water tank (1) has been filled in with water by looking at the water level indicator (20).

41.

Press the on/off switch (11): the indicator light of the switch (11) and the indicator light (14) will come on. Do

this operation only if the machine is off. If it’s on pass to the following point.

42.

Position the lever switch (13) on hot water.

43.

As soon as the indicator light (21) comes on, the machine is ready for use.

44.

Push up the steam/hot water lever switch (4): the indicator light (12) comes on. Push up the pump lever

switch (22).

45.

Hot water will flow out from the steam arm (6) immediately.

46.

Once you have got the desired quantity of water, repress the switch (22) and push down the steam/water

switch (4).

47.

After obtaining hot water from the arm (6), make sure that there is still water in the tank (1) and position the

switch (13) on coffee mode.



USEFUL TIPS:

-

The single cup filter (9), the two cup filter (10) and the pod filter (18) do not need to be washed after each

use but please check that the holes are not blocked.

-

For best results, we suggest warming the cups up on the cup warmer (2) which works only when the machine

is on.


ROUTINE MAINTANCE AND PRECAUTIONS:

-

It is recommended to clean, after each use, the steam arm (6) and the strainer holder (8) carefully.

-

For cleaning it is recommended the use of a wet damp cloth.

-

Do not leave the machine outdoor. And do not immerse the machine in water.

-

The machine can be used only by adults and must be kept away from children.

-

Do not wash strainer and strainer holder in dishwasher


TECNICAL DATA:

Voltage: 230 V – 50 Hz
Power: 1050 W
Heating time: ca. 3 min.
Pump pressure: 15 bar
Water tank: 2,7 litres
Dimensions (HxLxD): 24*26*39,5 cm
Weight: 9,5 kg
To be operated with ground coffee and coffee pods











Advertising