Vizio M421VT - Manual (Page 12)

VIZIO M421VT User Manual
12
www.VIZIO.com
To remove the base stand
1. Unplug all cables from the HDTV.
2. Place your HDTV face down on a soft and flat
surface (blanket, foam, cloth, etc) to prevent any
damage to the TV.
3. Remove the total of eight (4) screws holding the
base stand to the TV.
4. Carefully remove the stand, pulling the base towards
you.
To find the perfect mount for your HDTV, browse VIZIO’s certified mount selection at
www.VIZIO.com or
call directly 888-VIZIOCE (888-849-4623).
Wall Mounting Your HDTV
Your HDTV can be mounted on the wall for viewing. If you choose to mount your HDTV on the wall, follow
the instructions below.
1. Write down the serial number located on the back of your HDTV in the space provided on page 1 to
have it handy if you need to call for support.
2. Remove the stand base and neck:
a. Disconnect the cables from your
HDTV.
b. Place your HDTV face down on a
soft, flat surface to prevent damage
to the screen.
c. Remove the TV stand base per
above instructions.
3. Mount your HDTV on the wall:
a. Attach your HDTV to a wall mount
(sold separately) using the mounting
holes in the back panel of your HDTV (see illustration at the right).
b. Read the instructions that came with your specific wall mount to properly hang your HDTV.
M421VT Wall Mounting Specifications
Screw Size • M6
Screw Length • 10 mm
Screw Pitch • 1.0mm
Hole Pattern • VESA standard 200mm x 200mm
NOTE: If using wall mounts different from our certified ones, please verify that they are
UL/CSA/ETL listed wall mount brackets with suitable weight specs.