VTech VT2650 - Manual (Page 13)

12
Basic Operation
Phonebook Operation
Your VT 2650 can store up to 50 numbers with names in memory. Each memory location
can hold up to 32 digits for the number and up to 16 characters for the name.
NOTE
: The Handsets share a common phonebook, which is stored in the Base station.
This means that entries inserted by one Handset are available for both Handsets, and if
one deletes a phonebook entry, it will disappear from both Handsets.
When one Handset is accessing the phonebook, the other Handset cannot access it at
the same time. If this is attempted,
NOT AVAILABLE AT THIS TIME will display on the
second Handset.
Storing a New Entry
• Press
SEL
.
• With Phonebook selected, press
SEL again.
• Press to select
STORE
. Press
SEL
.
• You will be prompted to
ENTER
NUMBER
. Use the dialing keys to
enter the number you wish to store
in the phonebook. Press the
MUTE .
DEL
key to backspace and make
corrections. Press
SEL
.
• You will then be prompted to
ENTER
NAME
. Use the dialing keys to spell
the name. Press SEL .
• You will hear a confirmation tone, and
the new phonebook entry will display
briefly.
NOTES:
• If the phonebook is full, the Handset
will display
PHONEBOOK IS FULL
.
• You can also press
REDIAL
.
PAUSE
,
then or to scroll to the previously
dialed number from the redial list
which you want to store in the
phonebook. Press
SEL .
• While entering numbers, press and
hold
REDIAL
.
PAUSE
to add pauses if
necessary.
• If there is a duplicate number in the
phonebook, the display will show:
>STORE
REVIEW
ENTER NUMBER
595-9511_
NUMBER ALREADY
IN PHONE BOOK
PHONE BOOK
IS FULL
ENTER NAME
_