Worksaver PALLET FORK PF-448 - Manual (Page 3)

17 2
LIMITED WARRANTY
Worksaver warrants to the original purchaser of any new Pallet Fork (Model PF-448), that the equipment
be free from defects in material and workmanship for a period of six (6) months for non-commercial, state,
and municipalities. Use sixty (60) days for commercial use from date of retail sale.
Replacement or repair parts installed in the equipment covered by this warranty are warranted for sixty
(60) days from the date of purchase of such part or to the expiration of the applicable new equipment
warranty period, whichever occurs later.
Such parts shall be provided at no cost to the user during regular working hours. Worksaver reserves
the right to inspect any equipment or parts which are claimed to have been defective in material or
workmanship.
DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES
Worksaver’s obligation under this warranty, to the extent allowed by law, is in lieu of all warranties, implied
or expressed, including implied warranties of merchantability and fitness for a particular purpose and any
liability for incidental and consequential damages with respect to the sale or use of the items warranted.
Such incidental and consequential damages shall include but not be limited to: transportation charges
other than normal freight charges; cost of installation other than cost approved by Worksaver; duty; taxes;
charges for normal service or adjustments; loss of crops or any other loss of income; rental of substitute
equipment, expenses due to loss, damage, detention or delay in the delivery of equipment or parts
resulting from acts beyond the control of Worksaver.
THIS WARRANTY SHALL NOT APPLY:
1. To vendor items which carry their own warranties, such as hydraulic cylinders, tires, and tubes.
2. If the unit has been subjected to misapplication, abuse, misuse, negligence, fire or other accident.
3. If parts not made or supplied by Worksaver have been used in connection with the unit, if, in sole
judgement of Worksaver such use affects its performance, stability, or reliability.
4. If the unit has been altered or repaired outside of an authorized Worksaver dealership in a manner
which, in the sole judgement of Worksaver affects its performance, stability or reliability.
5. To normal maintenance service and normal replacement items such as gearbox lubricant, hydraulic
fluid, worn blades, or to normal deterioration of such things as belts and exterior finish, due to use or
exposure.
6. To expendable or wear items such as teeth, chains, sprockets, belts, springs and other items that in
the company’s sole judgement is a wear item.
NO EMPLOYEE OR REPRESENTATIVE OF WORKSAVER IS AUTHORIZED TO CHANGE THIS
WARRANTY IN ANY WAY OR GRANT ANY OTHER WARRANTY UNLESS SUCH CHANGE IS MADE IN
WRITING AND SIGNED BY WORKSAVER’S SERVICE MANAGER, POST OFFICE BOX 100, LITCHFIELD,
ILLINOIS 62056-0100.
OWNER SERVICE
Check the pins at the ends of the loader arms. Make
sure they are locked in place with the linchpins.
Periodically check all bolts to make sure they are tight.
Replace any worn or damaged parts immediately. Do
not use attachment with any damaged parts.
WARNING!
Always stop the tractor or skid steer, set brake,
shut off engine, remove key, and lower loader to
ground before attempting to service. Never leave
equipment unattended with engine running.
WARNING!
Do not work under a raised loader unless it is
securely blocked or held in position. Do not depend
on the hydraulic system to hold loader and attach-
ment in place.
REPLACE
SAFETY SIGNS
IF DAMAGED
OR MISSING.
CAUTION!
When traveling on public roads, whether at night or
during the day, use accessory light and devices for
adequate warnings to operators of other vehicles.
Comply with all federal, state and local laws.
Check visibility. If visibility is impaired, reduce speed or
consider other means of transport.
Allow for additional length of loader on tractor while
turning. Carry load low.
Select a safe ground travel speed when transporting
from one area to another. When traveling on roadways,
transport in such a way that faster moving vehicles may
pass you safely.
When traveling over rough or hilly terrain or when
making turns, slow down and use extra care.
Read all the safety warnings in the front of this manu-
al and in the manual of tractor or skid steer unit.
MAINTENANCE
——————————————————
TRANSPORTING
——————————————————
STORAGE
——————————————————
• At the end of the working season or when the pallet
fork will not be used for a long period, it is good
practice to clean off any dirt or grease that may have
accumulated.
• Inspect the pallet fork for loose, damaged or worn
parts and adjust or replace if needed.
• Sand areas where paint is chipped or worn and repaint
to prevent rust.
• Always store in a safe place away from children or
livestock.