Watlow Electric Sensors For High Temperature Heat Treating - Manual (Page 2)

Your Authorized Watlow Distributor Is:
United States Sales Offices: Atlanta/Greenville, (770)908-9164 • Austin, (512)249-1900 • Charlotte/Columbia, (704)541-3896 •
Chicago, (847)458-1500 • Cincinnati, (513)398-5500 • Cleveland, (330)467-1423 • Dallas, (972)620-6030 • Denver, (303)798-7778 •
Detroit, (248)651-0500 • Houston, (281)440-3074 • Indianapolis, (317)575-8932 • Kansas City, (913)897-3973 • Los Angeles, (714)935-2999 •
Maryland/Virginia, (410)840-8034 • Minneapolis, (612)431-5700 • Nashville, (615)264-6148 • New England, (603)882-1330 •
New York/New Jersey/Philadelphia, (215)345-8130 • New York,Upstate, (716)438-0454 • Orlando, (407)351-0737 • Phoenix, (602)708-1995 •
Pittsburgh, (412)322-5004 • Portland, (503)245-9037 • St. Louis, (314)878-4600 • Sacramento, (707)425-1155 • San Diego, (760)728-9188 •
San Francisco, (408)980-9355 • Seattle, (425)222-4090 • Tampa/St. Petersburg, (813)926-3600 • Tulsa, (918)496-2826 •
Winston Salem/Raleigh, (336)766-9659 • Wisconsin, (414)723-5990
Asian Sales Offices: Australia, +61 (3) 9335-6449 • China, +86 (21) 6229-8917 • Japan, +81 (03) 5403-4688 • Korea, +82 (02) 563-5777 •
Malaysia, +60 (4) 641-5977 • Singapore, +65 777-5488 • Taiwan, +886 (0) 7-261-8397 European Sales Offices: France, +33 (01) 3073-2425 •
Germany, +49 (0) 7253-9400-0 • Italy, +39 (02) 458-8841 • United Kingdom, +44 (0) 115-964-0777
Latin American Sales Office: Mexico, +52 (42) 17-6235
For other product information, call Watlow’s FAX REPLY: United States +1 (800) 367-0430 • Outside the United States +1 (732) 885-6344
Ordering Information
Series 61 -
Up to 1300˚F (704˚C)
Diameter
X = Not applicable
Calibration
J = Type J
K = Type K
T = Type T
Lead Protection
P =
Fiberglass (20 gauge solid) 900˚F (482˚C)
B = Fiberglass with SS overbraid
(20 gauge solid) 900˚F (482˚C)
J = Extruded FEP (20 gauge solid) 400˚F (205˚C)
F = Fiberglass (24 gauge solid) 900˚F (482˚C)
S = Fiberglass with SS overbraid
(24 gauge solid) 900˚F (482˚C)
7 = High temperature Fiberglass 1300˚F (704˚C)
Junction
E = Exposed
Enter X
Lead Length (inches)
Whole inches: 006 to 999
Terminations
A = Standard 2 1 ⁄ 2 inch split leads
D = Standard male plug, quick disconnect
E = Standard female jack, quick disconnect
F = Miniature male plug, quick disconnect
6 1 X _ _ _ _ _ _ _ _ E X
Ordering Information
High Temperature -
Up to 2700˚F (1482˚C)
Sheath O.D. (inch)
J = 0.250
Connector Type
A = Standard plug 400°F (205°C)
L = High temperature plug 1000°F (538°C)
Enter “0”
Insulation
AI 2 O 3
Loose pack B
Sheath Material
B = Alumina
3 = Molybdenum
Sheath Length “L” (inch)
Whole inches: 01 to 99
Sheath Length “L” (fractional inch)
0 = 0 2 = 1 ⁄ 4 4 = 1 ⁄ 2 6 = 3 ⁄ 4
1 = 1 ⁄ 8 3 = 3 ⁄ 8 5 = 5 ⁄ 8 7 = 7 ⁄ 8
Junction
Ungrounded
Single U
Calibration
S
Standard limits S
Special limits 7
Enter “00”
Special Requirements
If none, enter “0”, If required, consult factory
H C _ _ _ _ _ _ _ _ _ _ _ _ _ 0 0 0 0 J
Load Sensors Control Sensors
B U
Note: Consult the factory for AMS-2750-C calibration.
Note: Consult the factory for AMS-2750-C calibration.
Sensors for High temp/quark 10/20/00 2:50 PM Page 2