Optical output of audio received – weber VO32L User Manual
Page 29
VIZIO VO32L FHDTV10A User Manual
Version 10/17/2008
29
www.VIZIO.com
Optical Output of Audio received
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical AUDIO
OUT (white area) at the rear of the VO32L FHDTV10A.
1.
Turn off the power to the LCD HDTV and
Receiver/Amp.
2.
Using an SPDIF cable, connect the cable to the
audio input connector on the Receiver/Amp and
connect the other end to the OPTICAL OUT (white
area) audio connectors at the rear of the LCD
HDTV.
3.
Turn on the power to the LCD HDTV and
Receiver/Amp.
4.
Then press the
button on the
remote control to open the On-
Screen Display (OSD) menu.
5.
Press the on the remote
control to select the Audio Adjust
menu.
6.
Press the on the remote
control to select SPEAKERS.
7.
Press the on the remote
control to select OFF so that the
sound from the LCD HDTV will now
be routed through your
Receiver/Amp system.
Press the LAST key once to return to the previous screen or repeatedly to return to your program if task
has been completed.
Note:
a)
Refer to your Receiver/Amp user manual to select the corresponding audio input.
b)
The audio output is not amplified and cannot be connected directly to external speakers.