Nikon SB-400 - Manual (Page 14)

12
En
Basic operation
1
Attach the SB-400 to the camera
1
Make sure the SB-400 and
the camera body are turned
off.
2
Rotate the mounting foot
lock lever to the left, slide
the SB-400's mounting foot
into the camera's accessory
shoe and turn the lock lever
to the right. (illust. A and B)
• In case the mounting foot lock lever
does not stay to the right and a red
line appears (illust. C), the mounting
foot lock lever is not fully rotated to its
right position. Re-attach the SB-400 to
the camera again with the same
process above.
2
Adjust the flash head
1
Adjust the flash head to the
horizontal position.
60º
75º
90º
Horizontal